Mondeo MK4.5: Bluetooth OBD Adapter not reading error codes

During my vacation I got engine errors and my power was limited forcefully, so I stopped at a Ford Service and they told me that my DPF filter was clogged and they removed the errors and somehow even the power limitation, telling me that it will help me to get home without the power limitation and that the errors will reappear after about 250 km.

Well, after they intervened, my instant and median fuel consumptions were no longer indicated, as well as the km until empty, and i was not able to read the engine error codes anymore with my Bluetooth OBD interface, which now only sees ECU#1, not as well ECU#2 and ECU#3 as before.

Their diagnosis read a DPF_LOAD of 347% and a DPF_SOOT_LD of 300%, but they were not able to find the root cause.

The engine errors resurfaced after more than 500 km, but without the power limitation, and pulling in at another Ford Service, closer to home, they found the root cause to be the cracked intercooler, but strangely their soot load reading was exponentially lower: DPF_LOAD of 38% and DPF_SOOT_LD of 300%.

What could that Ford Service have done so that my Bluetooth OBD interface does not read the error codes anymore and only sees ECU#1?

I’ve attached the Mondeo Technician View After Fault.

#####################
EAG40757 – Mondeo Technician View (After Fault)
#####################

System :
Software version : IDS-129.08
Vehicle: Mondeo
Engine Type: Duratorq-Turbo Diesel Common Rail Injection StgV
Capacity: 2.0L
Transmission: Manual
Fuel Type: Diesel
(VIN): #########EAG40757

Strategy : BG91-
Filename : BG91-14C204-DE
Module Part Number:
Vehicle: Mondeo
Engine Type: Duratorq-Turbo Diesel Common Rail Injection StgV
Capacity: 2.0L
Transmission: Manual
Fuel Type: Diesel
(VIN): #########EAG40757
P0130:29-68- (PCM) – (02) Sensor Circuit (Bank 1 Sensor 1) – Signal Invalid –
Indeterminate,Fault previously detected but monitor has not completed to determine state.

Standard Equipment Modules
Fail – (ACM)
Fail – (DABM)
Fail – (DDM)
Fail – (IPC)
Fail – (PDM)
Optional equipment Modules
Fail – (AHCM)
Fail – (CCMii)
Fail – (CDP)
Fail – (CMR)
Fail – (DSM)
Fail – (HCM)
Fail – (HVAC)
Fail – (IPM-A)
Fail – (PAM)
Fail – (PBM)
Fail – (PSCM)
Fail – (RFA)
Fail – (RGTM)
Fail – (RHVAC)
Fail – (SOD-L)
Fail – (SOD-R)
Fail – (SRM)
Fail – (TRM)
Fail – (VDM)
Select Option
EXIT
Datalogger – Start – 24-Aug-23 – 7:48:35 PM
07:49PM, Thursday, August 24, 2023
Datalogger: selected Engine
Selected Parameters: DPF_LOAD(PER), DPF_SOOT_LD(PER), EGT11(TEMP), EGT12(TEMP)
8:15 PM, Thursday, August 24, 2023
All (CMDTCs)
Pass – (ABS)
Pass – (BCMii)
Pass – (PCM)
Pass – (RCM)
Pass – (SASM)
Standard Equipment Modules
Fail – (ACM)
Fail – (DABM)
Fail -(DDM)
Fail – (IRC)
Fail – (PDM)
Optional equipment Modules
Fail – (AHCM)
Fail – (CCMii)
Fail – (CDP)
Fail – (CMR)
Fail – (DSM)
Fail – (HCM)
Fail – (HVAC)
Fail – (IPM-A)
Fail – (PAM)
Fail – (PBM)
Fail – (PSCM)
Fail – (RFA)
Fail – (RGTM)
Fail – (RHVAC)
Fail – (SOD-L)
Fail – (SOD-R)
Fail – (SRM)
Fail – (TRM)
Fail – (VDM)
Cleared (CMDTCs)
B1130:07-28- (BCMii) – Light switch module – Mechanical Failures – Not Current (DTC),Fault
previously detected, not currently present.
B1147:15-6C- (BCMii) – Left Front Fog Lamps – Circuit Short To Battery Or Open – Pending
(DTC),Fault has failed in the current or previous key/drive cycle.
B1148:15-6C- (BCMii) – Right Front Fog Lamps – Circuit Short To Battery Or Open – Pending
(DTC),Fault has failed in the current or previous key/drive cycle.
B1B71:13-28- (BCMii) – Evaporator Temperature Sensor – Circuit Open – Not Current (DTC),Fault
previously detected, not currently present.
B1D02:15-68- (BCMii) – Left High Beam Circuit – Circuit Short To Battery Or Open –
Indeterminate,Fault previously detected but monitor has not completed to determine state.
U0010:88-2E- (BCMii) – Medium Speed (CAN) Communication Bus – Bus Off – Current
(DTC),Fault is currently present.
U0199:00-2E- (BCMii) – Lost Communication With ‘Door Control Module A’ – No Additional
Failure Type Information for this (DTC) – Current (DTC),Fault is currently present.
U0200:00-2E- (BCMii) – Lost Communication With ‘Door Control Module B’ – No Additional
Failure Type Information for this (DTC) – Current (DTC),Fault is currently present.
P0130:29-68- (PCM) – (02) Sensor Circuit (Bank 1 Sensor 1) – Signal Invalid –
Indeterminate,Fault previously detected but monitor has not completed to determine state.
Select Option
EXIT
Selected Parameters: DPF LOAD(PER), DPF_SOOT_LD(PER), EGT11(TEMP), EGT12(TEMP)
8:30 PM, Thursday, August 24, 2023
All (CMDTCs)
Pass – (ABS)
Pass – (BCMii)
Pass – (PCM)
Pass – (RCM)
Pass – (SASM)
Standard Equipment Modules
Fail – (ACM)
Fail – (DABM)
Fail -(DDM)
Fail – (IPC)
Fail – (PDM)
Optional equipment Modules
Fail – (AHCM)
Fail – (CCMii)
Fail – (CDP)
Fail – (CMR)
Fail – (DSM)
Fail – (HCM)
Fail – (HVAC)
Fail – (IPM-A)
Fail – (PAM)
Fail-(PBM)
Fail – (PSCM)
Fail – (RFA)
Fail – (RGTM)
Fail – (RHVAC)
Fail – (SOD-L)
Fail – (SOD-R)
Fail – (SRM)
Fail – (TRM)
Fail – (VDM)
Cleared (CMDTCs)
B1130:07-28- (BCMii) – Light switch module – Mechanical Failures – Not Current (DTC),Fault
previously detected, not currently present.
B1147:15-6C- (BCMii) – Left Front Fog Lamps – Circuit Short To Battery Or Open – Pending
(DTC),Fault has failed in the current or previous key/drive cycle.
B1148:15-6C- (BCMii) – Right Front Fog Lamps – Circuit Short To Battery Or Open – Pending
(DTC),Fault has failed in the current or previous key/drive cycle.
B1B71:13-28- (BCMii) – Evaporator Temperature Sensor – Circuit Open – Not Current (DTC),Fault
previously detected, not currently present.
B1D02:15-68- (BCMii) – Left High Beam Circuit – Circuit Short To Battery Or Open –
Indeterminate,Fault previously detected but monitor has not completed to determine state.
U0010:88-2E- (BCMii) – Medium Speed (CAN) Communication Bus – Bus Off – Current
(DTC),Fault is currently present.
U0199:00-2E- (BCMii) – Lost Communication With ’Door Control Module A’ – No Additional
Failure Type Information for this (DTC) – Current (DTC),Fault is currently present.
U0200:00-2E- (BCMii) – Lost Communication With ‘Door Control Module B’ – No Additional
Failure Type Information for this (DTC) – Current (DTC),Fault is currently present.
P0130:29-68- (PCM) – (02) Sensor Circuit (Bank 1 Sensor 1) – Signal Invalid –
Indeterminate,Fault previously detected but monitor has not completed to determine state.
Select Option
EXIT
All (CMDTCs)
Pass – (ABS)
Pass – (BCMii)
Pass – (PCM)
Pass – (RCM)
Pass – (SASM)
Standard Equipment Modules
Fail – (ACM)
Fail – (DABM)
Fail – (DDM)
Fail – (IPC)
Fail – (PDM)
Optional equipment Modules
Fail – (AHCM)
Fail – (CCMii)
Fail – (CDP)
Fail – (CMR)
Fail – (DSM)
Fail-(HCM)
Fail – (HVAC)
Fail – (IPM-A)
Fail – (PAM)
Fail – (PBM)
Fail – (PSCM)
Fail – (RFA)
Fail – (RGTM)
Fail – (RHVAC)
Fail – (SOD-L)
Fail – (SOD-R)
Fail – (SRM)
Fail – (TRM)
Fail – (VDM)
Cleared (CMDTCs)
B1130:07-28- (BCMii) – Light switch module – Mechanical Failures – Not Current (DTC),Fault
previously detected, not currently present.
B1147:15-6C- (BCMii) – Left Front Fog Lamps – Circuit Short To Battery Or Open – Pending
(DTC),Fault has failed in the current or previous key/drive cycle.
B1148:15-6C- (BCMii) – Right Front Fog Lamps – Circuit Short To Battery Or Open – Pending
(DTC),Fault has failed in the current or previous key/drive cycle.
B1B71:13-28- (BCMii) – Evaporator Temperature Sensor – Circuit Open – Not Current (DTC),Fault
previously detected, not currently present.
B1D02:15-68- (BCMii) – Left High Beam Circuit – Circuit Short To Battery Or Open –
Indeterminate,Fault previously detected but monitor has not completed to determine state.
U0010:88-2E- (BCMii) – Medium Speed (CAN) Communication Bus – Bus Off – Current
(DTC),Fault is currently present.
U0199:00-2E- (BCMii) – Lost Communication With ‘Door Control Module A’ – No Additional
Failure Type Information for this (DTC) – Current (DTC),Fault is currently present.
U0200:00-2E- (BCMii) – Lost Communication With ‘Door Control Module B’ – No Additional
Failure Type Information for this (DTC) – Current (DTC),Fault is currently present.
P0130:29-68- (PCM) – (02) Sensor Circuit (Bank 1 Sensor 1) – Signal Invalid –
Indeterminate,Fault previously detected but monitor has not completed to determine state.
Select Option
EXIT
All (CMDTCs)
Pass – (ABS)
Pass – (BCMii)
Pass – (PCM)
Pass – (RCM)
Pass – (SASM)
Standard Equipment Modules
Fail – (ACM)
Fail – (DABM)
Fail – (DDM)
Fail – (IPC)
Fail – (PDM)
Optional equipment Modules
Fail – (AHCM)
Fail – (CCMii)
Fail – (CDP)
Fail – (CMR)
Fail – (DSM)
Fail – (HCM)
Fail – (HVAC)
Fail – (IPM-A)
Fail – (PAM)
Fail – (PBM)
Fail – (PSCM)
Fail – (RFA)
Fail – (RGTM)
Fail – (RHVAC)
Fail – (SOD-L)
Fail – (SOD-R)
Fail – (SRM)
Fail – (TRM)
Fail – (VDM)
Cleared (CMDTCs)
B1130:07-28- (BCMii) – Light switch module – Mechanical Failures – Not Current (DTC),Fault
previously detected, not currently present.
B1147:15-6C- (BCMii) – Left Front Fog Lamps – Circuit Short To Battery Or Open – Pending
(DTC),Fault has failed in the current or previous key/drive cycle.
B1148:15-6C- (BCMii) – Right Front Fog Lamps – Circuit Short To Battery Or Open – Pending
(DTC),Fault has failed in the current or previous key/drive cycle.
B1B71:13-28- (BCMii) – Evaporator Temperature Sensor – Circuit Open – Not Current (DTC),Fault
previously detected, not currently present.
B1D02:15-68- (BCMii) – Left High Beam Circuit – Circuit Short To Battery Or Open –
Indeterminate,Fault previously detected but monitor has not completed to determine state.
U0010:88-2E- (BCMii) – Medium Speed (CAN) Communication Bus – Bus Off – Current
(DTC),Fault is currently present.
U0199:00-2E- (BCMii) – Lost Communication With ‘Door Control Module A’ – No Additional
Failure Type Information for this (DTC) – Current (DTC),Fault is currently present.
U0200:00-2E- (BCMii) – Lost Communication With ‘Door Control Module B’ – No Additional
Failure Type Information for this (DTC) – Current (DTC),Fault is currently present.
P0130:29-68- (PCM) – (02) Sensor Circuit (Bank 1 Sensor 1) – Signal Invalid –
Indeterminate,Fault previously detected but monitor has not completed to determine state.
Select Option
EXIT
8:45 PM, Thursday, August 24, 2023
Selected Parameters: DPF_LOAD(PER), DPF_SOOT_LD(PER), EGT11(TEMP), EGT12(TEMP)
Selected Parameters: DPF_DIF(PRESS), DPF LOAD(PER), DPF_SOOT_LD(PER), EGTII(TEMP),
EGT12(TEMP)
Vehicle: Mondeo
Engine Type: Duratorq-Turbo Diesel Common Rail Injection StgV
Capacity: 2.0L
Transmission: Manual
Fuel Type: Diesel
(VIN): #########EAG40757
Vehicle: Mondeo
Engine Type: Duratorq-Turbo Diesel Common Rail Injection StgV
Capacity: 2.0L
Transmission: Manual
Fuel Type: Diesel
(VIN): #########EAG40757
Vehicle: Mondeo
Engine Type: Duratorq-Turbo Diesel Common Rail Injection StgV
Capacity: 2.0L
Transmission: Manual
Fuel Type: Diesel
(VIN): #########EAG40757